Kesla Akon KV20 7 Section + Salvarani Oil-Box Control

Hydraulic Valve Akon KV20 is a sturdy control valve capable of managing a flow rate of 150 liters per minute and operating at pressures up to 315 bar. This valve is engineered to deliver top-notch performance in both open and closed center hydraulic systems. The valve comes with an adjustable main relief valve and is offered in various configurations including parallel (standard), series, and tandem circuit. It includes load hold check valves in each section, auxiliary valves, and an LS option. There is a broad selection of spool options available, along with interchangeable Ø19mm spools. Additionally, options for carry-over and closed center are available.

Salvarani Oil-Box All up-down switches with automatic centring (1-0-2) with or without latching. Each panel is sold complete with a 2m power cable with plug, and a set of 4m cables each with plugs for the distributors. We also have extension cable sets of 3m, 5m or 9m. In the switched position of any of the switches, the signal is also applied simultaneously to an additional pair of wires, which can be used to activate warning signals (horn, cockerel), or to switch on the pump via a relay. All the panels offered, by default, are equipped with pushbuttons with positioning spring-loaded, which automatically return to the neutral position. Include all plugs. Power cable 2 meters and from panel to valve 3 meters. In this solution you can control all 7 double-way section of Akon and one additional debice, for example light or horn.

--------------------------------------------------------------------------------------------------------------------------------------------------------------

Akon KV20

Standard Material Specifications:

High Resistence Cas Iron Body

Hard Chromium Plated Interchangable Spools

Steel spring caps

Aluminium Lever Caps

NBR Seals

Working Conditions:

Recommended Oil Viscosity Range: 10cSt to 75cSt

Recommended Oil Filtering: ß10>75

Recommended Fluid Temperature Range: -20°C to 80°C

Environmental Temperature Range: -35°C to 60°C

Maximum Contamination Leve: Class 10 (NAS 1638) 19/16 (ISO 4406)

Technical Specifications:

Nominal Flow: 150L/min; 40 US GPM

Number of Spools: 7

Maximum Working Pressure: 315 bar (250 bar in series circuit); 4600 psi (3600 psi in series circuit)

Maximum Back Pressure: 30 bar; 430 psi

Internal Leakage: 4cc - 9cc (100 bar; 32cSt, 40°C); 0.24 - 0.54 in³/m (1450 psi; 32cSt, 104°F)

Operation Characteristics:

Pilot Pressure: Min. 6 bar; 85 PSI | Max. 12bar; 170 PSI

Coil Chacteristics:

Coil Connection Type: DIN 43650

Supply Voltage: 24VDC

Protection Type: IP65

Nominal Voltage Tolerance: ±10%

Duty cycle: 100%

Absorbed Power: DC 6.5W

Coil Insulation Class: Class "H" coil as from the IEC 85 standard. Class "H" wire (200°C)

Maximum Temperatures: Class "F" 155°C; Class "H" 180°C

Stroke (mm): ±7.5mm

Beschreibung übersetzen