Bomet agregat uprawowy Carina U725/1, 3,2 m
EUR
2.450,16
sa 23% PDV-a
(1.992 bez 23% PDV-a)
Informatie in het Nederlands:
Ledig gewicht: 595 kg
Algemene staat: zeer goed
Technische staat: zeer goed
Optische staat: zeer goed
Serienummer: 2
Informationen auf Deutsch:
Leergewicht: 595 kg
Allgemeiner Zustand: sehr gut
Technischer Zustand: sehr gut
Optischer Zustand: sehr gut
Seriennummer: 2
Bomet Saatbettkombination Carina U725/1, 3,2 mSaatbettkombination Carina sind konstruiert für die Vorbereitung des Bodens zur Aussaat bei nur einer Fahrt. Die Aggregate können beim Zerkrümeln von Schollen, bei Vernichtung von verkrusteten Böden und Unkraut, sowie beim Mischen von Mineraldüngern mit dem Boden eingesetzt werden. Die Maschine ist mit leichten Zinken ausgestattet, die mit austauschbaren Schar enden.Die Zinken sind in 4 Reihen am Rahmen des Grubbers montiert. Der Abstand zwischen den Zinken beträgt 10 cm.An der Heckseite kann das Gerät mit einer mit Federdruck oder fließenden Krümelwalze mit einem Durchmesser von 295 mmausgestattet werden.Die Arbeitstiefe der Maschine wird mittels Stützrädern bestimmt und beträgt 12 cm.Für schwerere Böden mit einer großen Anzahl von Schollen wird empfohlen, eine vordere Walze zu verwenden, die diese zerquetscht und bricht.Das Bodenbearbeitungsset kann mit einem Anhängerkupplungsbalken ausgestattet werden, um den Anschluss der Maschine an den Traktor zu erleichtern.- Arbeitsbreite (m) 3.2- Arbeitstiefe (cm) 12- Anzahl der Zähne (Stk.) 32- Zahnquerteilung (cm) 10- Durchmesser der hinteren Rollen (mm) 295- Gewicht der Maschine mit schwimmenden Rollen (kg) 540- Gewicht der Maschine mit Rollen auf dem Druck (kg) 595- Leistungsbedarf (kW/PS) 60/82 Das Angebot gilt solange der Vorrat reicht.Bei Export ist nur der Nettopreis zu bezahlen (unter Angabe der gültigen USt.-ID Nummer).Wir organisieren gerne Transport für Sie.
Informacje po polsku:
Własna masa pojazdu: 595 kg
Stan ogólny: bardzo dobrze
Stan techniczny: bardzo dobrze
Stan wizualny: bardzo dobrze
Numer serii: 2
Bomet agregat uprawowy Carina U725/1, 3,2 mAgregaty uprawowe Carina przeznaczone są do przygotowania gleby do siewu podczas jednego przejazdu. Mogą być stosowane do kruszenia brył, niszczenia zaskorupionych gleb oraz niszczenia chwastów i mieszania nawozów mineralnych z glebą. Maszyna jest wyposażona w zęby sprężynowe lekkie, zakończone wymienną redliczką. Zęby mocowane są w 4 rzędach na ramie kultywatora. Rozstaw między zębami wynosi 10 cm. Z tyłu agregat może być wyposażony w wały strunowe pływające lub na docisku sprężynowym o średnicy 295 mm. Głębokość robocza maszyny jest ustalana za pomocą kół podporowych i wynosi 12 cm. Na gleby cięższe, zlewne gdzie występuje duża liczba brył zaleca się zastosowanie wału przedniego, który je rozkruszy i rozbije. Dla łatwiejszego agregatowania z ciągnikiem agregat może być wyposażony w belkę sprzęgową. - Szerokość robocza (m) 3,2 - Głębokość robocza (cm) 12 - Liczba zębów (szt.) 32 - Podziałka poprzeczna zębów (cm) 10 - Średnica wałów tylnych (mm) 295 - Masa maszyny z wałami pływającymi (kg) 540 - Masa maszyny z wałami na docisku (kg) 595 - Zapotrzebowanie mocy (kW/KM) 60/82 Oferta ważna do wyczerpania zapasów. Podana cena jest ceną netto.
Information in English:
Empty weight: 595 kg
General condition: very good
Technical condition: very good
Visual appearance: very good
Serial number: 2
Bomet cultivator Carina U725/1, 3,2 m Carina cultivators are designed to prepare the soil for sowing in one pass. They can be used for crushing clods, destroying encrusted soils, weeds and mixing mineral fertilizers with the soil. The machine is equipped with light spring tines, finished with a replaceable coulter. The tines are mounted in 4 rows on the cultivator frame. The spacing between the teeth is 10 cm. At the rear, the unit can be equipped with floating or spring-loaded rollers with a diameter of 295 mm. The working depth of the machine is set by the support wheels and is 12 cm. For heavier, catchment soils with a large number of lumps, it is recommended to use the front roller, which will crumble and break them. For easier aggregation with a tractor, the aggregate can be equipped with a drawbar. - Working width (m) 3.2- Working depth (cm) 12- Number of teeth (pcs.) 32- Teeth transverse pitch (cm) 10- Diameter of rear rollers (mm) 295- Weight of the machine with floating rollers (kg) 540- Weight of the machine with rollers on the pressure (kg) 595- Power demand (kW/HP) 60/82 EXPORT: ONLY THE NET AMOUNT NEED TO PAID (with valid EU- VAT number)/ TRANSPORTATION WORLDWIDE POSSIBLE at good conditions. Offer valid while stocks last.
Informations en Français:
Poids à vide: 595 kg
État général: très bon
État technique: très bon
État optique: très bon
Numéro de série: 2
Bomet cultivator Carina U725/1, 3,2 m Carina cultivators are designed to prepare the soil for sowing in one pass. They can be used for crushing clods, destroying encrusted soils, weeds and mixing mineral fertilizers with the soil. The machine is equipped with light spring tines, finished with a replaceable coulter. The tines are mounted in 4 rows on the cultivator frame. The spacing between the teeth is 10 cm. At the rear, the unit can be equipped with floating or spring-loaded rollers with a diameter of 295 mm. The working depth of the machine is set by the support wheels and is 12 cm. For heavier, catchment soils with a large number of lumps, it is recommended to use the front roller, which will crumble and break them. For easier aggregation with a tractor, the aggregate can be equipped with a drawbar. - Working width (m) 3.2- Working depth (cm) 12- Number of teeth (pcs.) 32- Teeth transverse pitch (cm) 10- Diameter of rear rollers (mm) 295- Weight of the machine with floating rollers (kg) 540- Weight of the machine with rollers on the pressure (kg) 595- Power demand (kW/HP) 60/82 EXPORT: ONLY THE NET AMOUNT NEED TO PAID (with valid EU- VAT number)/ TRANSPORTATION WORLDWIDE POSSIBLE at good conditions. Offer valid while stocks last.
Informazioni in italiano:
Bomet cultivator Carina U725/1, 3,2 m Carina cultivators are designed to prepare the soil for sowing in one pass. They can be used for crushing clods, destroying encrusted soils, weeds and mixing mineral fertilizers with the soil. The machine is equipped with light spring tines, finished with a replaceable coulter. The tines are mounted in 4 rows on the cultivator frame. The spacing between the teeth is 10 cm. At the rear, the unit can be equipped with floating or spring-loaded rollers with a diameter of 295 mm. The working depth of the machine is set by the support wheels and is 12 cm. For heavier, catchment soils with a large number of lumps, it is recommended to use the front roller, which will crumble and break them. For easier aggregation with a tractor, the aggregate can be equipped with a drawbar. - Working width (m) 3.2- Working depth (cm) 12- Number of teeth (pcs.) 32- Teeth transverse pitch (cm) 10- Diameter of rear rollers (mm) 295- Weight of the machine with floating rollers (kg) 540- Weight of the machine with rollers on the pressure (kg) 595- Power demand (kW/HP) 60/82 EXPORT: ONLY THE NET AMOUNT NEED TO PAID (with valid EU- VAT number)/ TRANSPORTATION WORLDWIDE POSSIBLE at good conditions. Offer valid while stocks last.
Informações em Português:
Peso vazio: 595 kg
Estado geral: muito bom
Estado técnico: muito bom
Aspeto visual: muito bom
Número de série: 2
Información en español:
Peso en vacío: 595 kg
Estado general: muy bueno
Estado técnico: muy bueno
Estado óptico: muy bueno
Número de serie: 2
Bomet cultivator Carina U725/1, 3,2 m Carina cultivators are designed to prepare the soil for sowing in one pass. They can be used for crushing clods, destroying encrusted soils, weeds and mixing mineral fertilizers with the soil. The machine is equipped with light spring tines, finished with a replaceable coulter. The tines are mounted in 4 rows on the cultivator frame. The spacing between the teeth is 10 cm. At the rear, the unit can be equipped with floating or spring-loaded rollers with a diameter of 295 mm. The working depth of the machine is set by the support wheels and is 12 cm. For heavier, catchment soils with a large number of lumps, it is r
Ledig gewicht: 595 kg
Algemene staat: zeer goed
Technische staat: zeer goed
Optische staat: zeer goed
Serienummer: 2
Informationen auf Deutsch:
Leergewicht: 595 kg
Allgemeiner Zustand: sehr gut
Technischer Zustand: sehr gut
Optischer Zustand: sehr gut
Seriennummer: 2
Bomet Saatbettkombination Carina U725/1, 3,2 mSaatbettkombination Carina sind konstruiert für die Vorbereitung des Bodens zur Aussaat bei nur einer Fahrt. Die Aggregate können beim Zerkrümeln von Schollen, bei Vernichtung von verkrusteten Böden und Unkraut, sowie beim Mischen von Mineraldüngern mit dem Boden eingesetzt werden. Die Maschine ist mit leichten Zinken ausgestattet, die mit austauschbaren Schar enden.Die Zinken sind in 4 Reihen am Rahmen des Grubbers montiert. Der Abstand zwischen den Zinken beträgt 10 cm.An der Heckseite kann das Gerät mit einer mit Federdruck oder fließenden Krümelwalze mit einem Durchmesser von 295 mmausgestattet werden.Die Arbeitstiefe der Maschine wird mittels Stützrädern bestimmt und beträgt 12 cm.Für schwerere Böden mit einer großen Anzahl von Schollen wird empfohlen, eine vordere Walze zu verwenden, die diese zerquetscht und bricht.Das Bodenbearbeitungsset kann mit einem Anhängerkupplungsbalken ausgestattet werden, um den Anschluss der Maschine an den Traktor zu erleichtern.- Arbeitsbreite (m) 3.2- Arbeitstiefe (cm) 12- Anzahl der Zähne (Stk.) 32- Zahnquerteilung (cm) 10- Durchmesser der hinteren Rollen (mm) 295- Gewicht der Maschine mit schwimmenden Rollen (kg) 540- Gewicht der Maschine mit Rollen auf dem Druck (kg) 595- Leistungsbedarf (kW/PS) 60/82 Das Angebot gilt solange der Vorrat reicht.Bei Export ist nur der Nettopreis zu bezahlen (unter Angabe der gültigen USt.-ID Nummer).Wir organisieren gerne Transport für Sie.
Informacje po polsku:
Własna masa pojazdu: 595 kg
Stan ogólny: bardzo dobrze
Stan techniczny: bardzo dobrze
Stan wizualny: bardzo dobrze
Numer serii: 2
Bomet agregat uprawowy Carina U725/1, 3,2 mAgregaty uprawowe Carina przeznaczone są do przygotowania gleby do siewu podczas jednego przejazdu. Mogą być stosowane do kruszenia brył, niszczenia zaskorupionych gleb oraz niszczenia chwastów i mieszania nawozów mineralnych z glebą. Maszyna jest wyposażona w zęby sprężynowe lekkie, zakończone wymienną redliczką. Zęby mocowane są w 4 rzędach na ramie kultywatora. Rozstaw między zębami wynosi 10 cm. Z tyłu agregat może być wyposażony w wały strunowe pływające lub na docisku sprężynowym o średnicy 295 mm. Głębokość robocza maszyny jest ustalana za pomocą kół podporowych i wynosi 12 cm. Na gleby cięższe, zlewne gdzie występuje duża liczba brył zaleca się zastosowanie wału przedniego, który je rozkruszy i rozbije. Dla łatwiejszego agregatowania z ciągnikiem agregat może być wyposażony w belkę sprzęgową. - Szerokość robocza (m) 3,2 - Głębokość robocza (cm) 12 - Liczba zębów (szt.) 32 - Podziałka poprzeczna zębów (cm) 10 - Średnica wałów tylnych (mm) 295 - Masa maszyny z wałami pływającymi (kg) 540 - Masa maszyny z wałami na docisku (kg) 595 - Zapotrzebowanie mocy (kW/KM) 60/82 Oferta ważna do wyczerpania zapasów. Podana cena jest ceną netto.
Information in English:
Empty weight: 595 kg
General condition: very good
Technical condition: very good
Visual appearance: very good
Serial number: 2
Bomet cultivator Carina U725/1, 3,2 m Carina cultivators are designed to prepare the soil for sowing in one pass. They can be used for crushing clods, destroying encrusted soils, weeds and mixing mineral fertilizers with the soil. The machine is equipped with light spring tines, finished with a replaceable coulter. The tines are mounted in 4 rows on the cultivator frame. The spacing between the teeth is 10 cm. At the rear, the unit can be equipped with floating or spring-loaded rollers with a diameter of 295 mm. The working depth of the machine is set by the support wheels and is 12 cm. For heavier, catchment soils with a large number of lumps, it is recommended to use the front roller, which will crumble and break them. For easier aggregation with a tractor, the aggregate can be equipped with a drawbar. - Working width (m) 3.2- Working depth (cm) 12- Number of teeth (pcs.) 32- Teeth transverse pitch (cm) 10- Diameter of rear rollers (mm) 295- Weight of the machine with floating rollers (kg) 540- Weight of the machine with rollers on the pressure (kg) 595- Power demand (kW/HP) 60/82 EXPORT: ONLY THE NET AMOUNT NEED TO PAID (with valid EU- VAT number)/ TRANSPORTATION WORLDWIDE POSSIBLE at good conditions. Offer valid while stocks last.
Informations en Français:
Poids à vide: 595 kg
État général: très bon
État technique: très bon
État optique: très bon
Numéro de série: 2
Bomet cultivator Carina U725/1, 3,2 m Carina cultivators are designed to prepare the soil for sowing in one pass. They can be used for crushing clods, destroying encrusted soils, weeds and mixing mineral fertilizers with the soil. The machine is equipped with light spring tines, finished with a replaceable coulter. The tines are mounted in 4 rows on the cultivator frame. The spacing between the teeth is 10 cm. At the rear, the unit can be equipped with floating or spring-loaded rollers with a diameter of 295 mm. The working depth of the machine is set by the support wheels and is 12 cm. For heavier, catchment soils with a large number of lumps, it is recommended to use the front roller, which will crumble and break them. For easier aggregation with a tractor, the aggregate can be equipped with a drawbar. - Working width (m) 3.2- Working depth (cm) 12- Number of teeth (pcs.) 32- Teeth transverse pitch (cm) 10- Diameter of rear rollers (mm) 295- Weight of the machine with floating rollers (kg) 540- Weight of the machine with rollers on the pressure (kg) 595- Power demand (kW/HP) 60/82 EXPORT: ONLY THE NET AMOUNT NEED TO PAID (with valid EU- VAT number)/ TRANSPORTATION WORLDWIDE POSSIBLE at good conditions. Offer valid while stocks last.
Informazioni in italiano:
Bomet cultivator Carina U725/1, 3,2 m Carina cultivators are designed to prepare the soil for sowing in one pass. They can be used for crushing clods, destroying encrusted soils, weeds and mixing mineral fertilizers with the soil. The machine is equipped with light spring tines, finished with a replaceable coulter. The tines are mounted in 4 rows on the cultivator frame. The spacing between the teeth is 10 cm. At the rear, the unit can be equipped with floating or spring-loaded rollers with a diameter of 295 mm. The working depth of the machine is set by the support wheels and is 12 cm. For heavier, catchment soils with a large number of lumps, it is recommended to use the front roller, which will crumble and break them. For easier aggregation with a tractor, the aggregate can be equipped with a drawbar. - Working width (m) 3.2- Working depth (cm) 12- Number of teeth (pcs.) 32- Teeth transverse pitch (cm) 10- Diameter of rear rollers (mm) 295- Weight of the machine with floating rollers (kg) 540- Weight of the machine with rollers on the pressure (kg) 595- Power demand (kW/HP) 60/82 EXPORT: ONLY THE NET AMOUNT NEED TO PAID (with valid EU- VAT number)/ TRANSPORTATION WORLDWIDE POSSIBLE at good conditions. Offer valid while stocks last.
Informações em Português:
Peso vazio: 595 kg
Estado geral: muito bom
Estado técnico: muito bom
Aspeto visual: muito bom
Número de série: 2
Información en español:
Peso en vacío: 595 kg
Estado general: muy bueno
Estado técnico: muy bueno
Estado óptico: muy bueno
Número de serie: 2
Bomet cultivator Carina U725/1, 3,2 m Carina cultivators are designed to prepare the soil for sowing in one pass. They can be used for crushing clods, destroying encrusted soils, weeds and mixing mineral fertilizers with the soil. The machine is equipped with light spring tines, finished with a replaceable coulter. The tines are mounted in 4 rows on the cultivator frame. The spacing between the teeth is 10 cm. At the rear, the unit can be equipped with floating or spring-loaded rollers with a diameter of 295 mm. The working depth of the machine is set by the support wheels and is 12 cm. For heavier, catchment soils with a large number of lumps, it is r
Prevedi opis
Prikaži original
rabljeni plugovi, drljače, kultivatori, tanjurače i drugi rabljeni poljoprivredni strojevi na jednom mjestu!
Rabljeni stroj
Tip:
agregat uprawowy Carina U725/1, 3,2 m
Godina proizvodnje:
2024
PDF specifikacija
Dodati u podsjetnik
Maciej Borkowski (english, polski)
Prikazati broj telefona
Prikazati broj telefona
Adresa je provjerena
Provjereni telefonski broj
Dobra kvaliteta podataka
Provjereni telefonski broj
Dobra kvaliteta podataka
ČLAN OD 2017
Ocjena trgovca
AB Group Anita Bołtryk
Stoleczna 7/114
15-879 - Bialystok
15-879 - Bialystok
Landwirt.com Auszeichnung
Novosti o trgovcu
Recenzije trgovca
Cjelokupna ocjena:
22.10.2024
02.08.2022
12.04.2022
08.04.2022
29.11.2019
Procijenite dilere
Ostale ponude ovog trgovca
Sve ponude trgovca