wóz paszowy Fider 10 m3

Informatie in het Nederlands:

Type: Opraapwagen



Informationen auf Deutsch:

Typ: Sammelwagen

ZAMET Futtermischwagen Fider 10 m3- Boden aus S355-Stahl, Dicke 20 mm- Korb aus S355-Stahl, Dicke 8 mm- Schnecke aus S355-Stahl, Dicke 14 mm - Gesamthöhe 273 cm- Gesamtbreite 230 cm- Leistungsbedarf 40 kW- Zapfwellenantrieb 540 U/min- Anzahl der Hydraulikausgänge 2- Min. Ölpumpendurchfluss. 25 l/Min- Gewicht: 3500 kg- Transportabmessungen: L x B x H (m): 4,0 x 2,3 x 2,7 Standardausstattung der Maschine:- Reifen 10.0-75-15.3- Elektronisches Wiegesystem mit vier Sensoren- Zweiganggetriebe 1:1-1,94:1- Querbodenförderer aus PVC-Band- Zapfwelle- Inspektionsplattform- Mechanisch verstellbarer Stützfuß- Sicherungsring gegen Herausfallen des Futters- Unterlegkeile- Schneckenmesser mit Sinterhartmetall (gehärtet) Optionale Ausstattung der Maschine:- Achsversatz am Fahrzeugheck- Reifen 400-60-15,5- Reifen 30 × 11,5-14,5- Straßenbeleuchtung- Hydraulisch verstellbarer Stützfuß- 2-Gang Stützfuß - Weitwinkelgelenkwelle- zusätzlicher Austrag- hydraulisch gesteuertes Gegenmesser 1 Stk.- El. Verteiler mit 2 Sektionen- El. Verteiler mit 3 Sektionen- El. Verteiler mit 4 Sektionen- Obere Transportkupplung- Ring in einem Winkel von 45 St.- Installation des Rings- Rutschrinne- PVC-Längsband 900x1500mm- PVC-Kreuzband 700x2100mm Das Angebot gilt solange der Vorrat reicht. Bei Export ist nur der Nettopreis zu bezahlen (unter Angabe der gültigen USt.-ID Nummer). Wir organisieren gerne Transport für Sie.



Informacje po polsku:

Typ: Przyczepa samozbierająca

Zamet wóz paszowy Fider 10 m3 - Wysokość całkowita 273 cm- Szerokość całkowita 230 cm- Zapotrzebowanie mocy 40 kW- Napęd WOM 540 obr/min- Liczba wyjść hydraulicznych 2 szt.- Min. wydajność pompy olejowej. 25 l/min- Waga: 3500 kg- Wymiary transportowe: dł. x szer. x wys. (m): 4,0x2,3x2,7 Standardowe wyposażenie maszyny:- Opony 10,0-75-15,3- Elektroniczny system ważenia oparty na czterech czujnikach- Dwie prędkości przełożenia 1:1-1,94:1- Przenośnik poprzeczny na bazie taśmy PCV- Wał przegubowo-teleskopowy - Platforma inspekcyjna- Stopka podporowa regulowana mechanicznie- Pierścień zapobiegający wypadaniu paszy- Nóż wspomagający wyładowanie- Kliny podpierające pod kołami- Noże na ślimaku, ostrzone laserowo (hartowane) Opcjonalne wyposażenie maszyny:- Opony 400-60-15,5- Opony 30×11,5-14,5- Oświetlenie drogowe- Stopka podporowa regulowana hydraulicznie- Stopka podporowa z dwiema prędkościami- Wał szerokokątny WOM- Dodatkowe okno wylotowe- Przeciwnóż sterowany hydraulicznie 1 szt.- Rozdzielacz elektryczny 2-sekcyjny- Rozdzielacz elektryczny 3-sekcyjny- Zaczep transportowy górny- Pierścień pod kątem 45 stopni- Ślimak wykonany z blachy 14 mm- Zsyp- Taśma PCV 900x1500 mm Oferta ważna do wyczerpania zapasów. Podana cena jest ceną netto.



Information in English:

Type: Forage wagon

Zamet feed wagon Fider 10 m3 - Total height 273 cm- Total width 230 cm- Power requirement 40 kW- PTO drive 540 rpm- Number of hydraulic outlets 2- Min. output of the oil pump. 25 l/min- Weight: 3500 kg- Transport dimensions: L x W x H (m): 4.0x2.3x2.7 Standard equipment of the machine:- Tires 10.0-75-15.3- Electronic weighing system based on four sensors- Two speed gear ratio 1:1-1.94:1- Cross floor conveyor based on PVC tape- PTO shaft - Inspection platform- Support foot mechanically adjustable- Ring to prevent feed from falling out- Knife supporting the discharge- Support wedges under the wheels- Knives on the auger, laser sharpened (hardened) Optional equipment of the machine:- Tires 400-60-15.5- Tires 30×11.5-14.5- Road lighting- Support foot hydraulically adjustable- Two-speed support foot- Wide angle PTO shaft- Additional discharge window- Hydraulically controlled counter knife 1 pc.- Electrical splitter 2-section- Electrical splitter 3-section- Upper transport hitch- Ring at 45 degrees- Ring construction:- Screw made of 14 mm sheet- Chute- PVC tape 900x1500 mm EXPORT: ONLY THE NET AMOUNT NEED TO PAID (with valid EU- VAT number)/ TRANSPORTATION WORLDWIDE POSSIBLE at good conditions. Offer valid while stocks last.



Informations en Français:

Modèle: Ramasseuse

Zamet feed wagon Fider 10 m3 - Total height 273 cm- Total width 230 cm- Power requirement 40 kW- PTO drive 540 rpm- Number of hydraulic outlets 2- Min. output of the oil pump. 25 l/min- Weight: 3500 kg- Transport dimensions: L x W x H (m): 4.0x2.3x2.7 Standard equipment of the machine:- Tires 10.0-75-15.3- Electronic weighing system based on four sensors- Two speed gear ratio 1:1-1.94:1- Cross floor conveyor based on PVC tape- PTO shaft - Inspection platform- Support foot mechanically adjustable- Ring to prevent feed from falling out- Knife supporting the discharge- Support wedges under the wheels- Knives on the auger, laser sharpened (hardened) Optional equipment of the machine:- Tires 400-60-15.5- Tires 30×11.5-14.5- Road lighting- Support foot hydraulically adjustable- Two-speed support foot- Wide angle PTO shaft- Additional discharge window- Hydraulically controlled counter knife 1 pc.- Electrical splitter 2-section- Electrical splitter 3-section- Upper transport hitch- Ring at 45 degrees- Ring construction:- Screw made of 14 mm sheet- Chute- PVC tape 900x1500 mm EXPORT: ONLY THE NET AMOUNT NEED TO PAID (with valid EU- VAT number)/ TRANSPORTATION WORLDWIDE POSSIBLE at good conditions. Offer valid while stocks last.



Informazioni in italiano:

Zamet feed wagon Fider 10 m3 - Total height 273 cm- Total width 230 cm- Power requirement 40 kW- PTO drive 540 rpm- Number of hydraulic outlets 2- Min. output of the oil pump. 25 l/min- Weight: 3500 kg- Transport dimensions: L x W x H (m): 4.0x2.3x2.7 Standard equipment of the machine:- Tires 10.0-75-15.3- Electronic weighing system based on four sensors- Two speed gear ratio 1:1-1.94:1- Cross floor conveyor based on PVC tape- PTO shaft - Inspection platform- Support foot mechanically adjustable- Ring to prevent feed from falling out- Knife supporting the discharge- Support wedges under the wheels- Knives on the auger, laser sharpened (hardened) Optional equipment of the machine:- Tires 400-60-15.5- Tires 30×11.5-14.5- Road lighting- Support foot hydraulically adjustable- Two-speed support foot- Wide angle PTO shaft- Additional discharge window- Hydraulically controlled counter knife 1 pc.- Electrical splitter 2-section- Electrical splitter 3-section- Upper transport hitch- Ring at 45 degrees- Ring construction:- Screw made of 14 mm sheet- Chute- PVC tape 900x1500 mm EXPORT: ONLY THE NET AMOUNT NEED TO PAID (with valid EU- VAT number)/ TRANSPORTATION WORLDWIDE POSSIBLE at good conditions. Offer valid while stocks last.



Informações em Português:

Tipo: Vagão de forragem



Información en español:

Tipo: Remolque autocargador

Zamet feed wagon Fider 10 m3 - Total height 273 cm- Total width 230 cm- Power requirement 40 kW- PTO drive 540 rpm- Number of hydraulic outlets 2- Min. output of the oil pump. 25 l/min- Weight: 3500 kg- Transport dimensions: L x W x H (m): 4.0x2.3x2.7 Standard equipment of the machine:- Tires 10.0-75-15.3- Electronic weighing system based on four sensors- Two speed gear ratio 1:1-1.94:1- Cross floor conveyor based on PVC tape- PTO shaft - Inspection platform- Support foot mechanically adjustable- Ring to prevent feed from falling out- Knife supporting the discharge- Support wedges under the wheels- Knives on the auger, laser sharpened (hardened) Optional equipment of the machine:- Tires 400-60-15.5- Tires 30×11.5-14.5- Road lighting- Support foot hydraulically adjustable- Two-speed support foot- Wide angle PTO shaft- Additional discharge window- Hydraulically controlled counter knife 1 pc.- Electrical splitter 2-section- Electrical splitter 3-section- Upper transport hitch- Ring at 45 degrees- Ring construction:- Screw made of 14 mm sheet- Chute- PVC tape 900x1500 mm EXPORT: ONLY THE NET AMOUNT NEED TO PAID (with valid EU- VAT number)/ TRANSPORTATION WORLDWIDE POSSIBLE at good conditions. Offer valid while stocks last.



Information på dansk:

Type: Fodervogn

Traduire la description