Used machines ...
Iseki TM 3217AL mit Frontlader
-
-
Questions to this offer?
EUR
19.900
incl. VAT 20%
(16.583,33 excl. VAT 20%)
ISEKI TM 3217 AL Front Loader
Engine:
The ISEKI TM 3217 AL is equipped with an ISEKI-developed engine with an output of 20 hp and a displacement of 1,123 cc.
This engine is water-cooled and meets the emission limits of the EU Stage V directive.
Transmission:
The ISEKI TM 3217 AL offers three reduction gear ranges. Combined with a synchronized manual transmission, this model reaches a top speed of up to 25 km/h (depending on tires).
It is operated via an accelerator pedal in the right footwell, a range and gear shift lever on the left fender, and a mechanical shuttle lever on the left side of the steering column.
Hydraulics:
The ISEKI TM 3217 AHL ironer is equipped as standard with a double-acting hydraulic control valve with a floating position. These are controlled by a single lever located in the right fender.
The cab models do not have auxiliary hydraulics as standard.
The machine is also equipped with a hydraulic rear power lift, which is also controlled by a lever on the right fender.
PTO:
This machine offers a speed of 540 rpm on the rear PTO. The PTO is mechanically preselected and engaged via the drive clutch, thus interrupting PTO operation when the clutch is engaged.
Equipment:
The machine is equipped as standard for operation within the German Road Traffic Licensing Regulations (StVZO). A height-adjustable open-end coupling and a 7-pin trailer socket are included as standard.
Additional equipment:
- AS wheels, front 23 x 10.50-12
- AS wheels, rear 280/70 R18
Outer width: 1,244 mm
Bar height (3217 / 3267): 2,365 mm / 2,384 mm
Cabin height (3217 / 3267): 2,025 mm / 2,019 mm
- Mechanical hydraulic valve with 3 control functions
The control block is mounted on the right fender, and its cover serves as an armrest.
Control is via a joystick and a single lever.
The following control functions are available:
DS (double-acting with floating position)
D (double-acting)
ES (single-acting with floating position)
- Rear hydraulic coupling
for external devices with ARGUS NW 8 quick-coupling socket (set = 1 piece)
- Front loader mounting brackets
The various hydraulic functions are separated from each other by shut-off valves or by disconnecting the hydraulic couplings.
Maximum lifting height: 2,000 mm
Continuous lifting capacity: 363 kg
Maximum lifting capacity: 438 kg
- Front loader boom
consisting of 2 double-acting lifting cylinders and hydraulic implement actuation
- Light material bucket 1.20 m
Working width: 1,200 mm
Engine:
The ISEKI TM 3217 AL is equipped with an ISEKI-developed engine with an output of 20 hp and a displacement of 1,123 cc.
This engine is water-cooled and meets the emission limits of the EU Stage V directive.
Transmission:
The ISEKI TM 3217 AL offers three reduction gear ranges. Combined with a synchronized manual transmission, this model reaches a top speed of up to 25 km/h (depending on tires).
It is operated via an accelerator pedal in the right footwell, a range and gear shift lever on the left fender, and a mechanical shuttle lever on the left side of the steering column.
Hydraulics:
The ISEKI TM 3217 AHL ironer is equipped as standard with a double-acting hydraulic control valve with a floating position. These are controlled by a single lever located in the right fender.
The cab models do not have auxiliary hydraulics as standard.
The machine is also equipped with a hydraulic rear power lift, which is also controlled by a lever on the right fender.
PTO:
This machine offers a speed of 540 rpm on the rear PTO. The PTO is mechanically preselected and engaged via the drive clutch, thus interrupting PTO operation when the clutch is engaged.
Equipment:
The machine is equipped as standard for operation within the German Road Traffic Licensing Regulations (StVZO). A height-adjustable open-end coupling and a 7-pin trailer socket are included as standard.
Additional equipment:
- AS wheels, front 23 x 10.50-12
- AS wheels, rear 280/70 R18
Outer width: 1,244 mm
Bar height (3217 / 3267): 2,365 mm / 2,384 mm
Cabin height (3217 / 3267): 2,025 mm / 2,019 mm
- Mechanical hydraulic valve with 3 control functions
The control block is mounted on the right fender, and its cover serves as an armrest.
Control is via a joystick and a single lever.
The following control functions are available:
DS (double-acting with floating position)
D (double-acting)
ES (single-acting with floating position)
- Rear hydraulic coupling
for external devices with ARGUS NW 8 quick-coupling socket (set = 1 piece)
- Front loader mounting brackets
The various hydraulic functions are separated from each other by shut-off valves or by disconnecting the hydraulic couplings.
Maximum lifting height: 2,000 mm
Continuous lifting capacity: 363 kg
Maximum lifting capacity: 438 kg
- Front loader boom
consisting of 2 double-acting lifting cylinders and hydraulic implement actuation
- Light material bucket 1.20 m
Working width: 1,200 mm
ISEKI TM 3217 AL-Frontlader
Motor:
In dem ISEKI TM 3217 AL ist ein ISEKI eigener Motor mit einer
Leistung von 20 PS und einem Hubraum von 1.123 cm³ verbaut.
Dieser Motor ist wassergekühlt und unterschreiten die
Abgasgrenzwerte gemäß EU-Richtlinienvorschlages Stage V.
Getriebe:
Der ISEKI TM 3217 AL bietet drei Vorgelegegruppen. Kombiniert mit
einem synchronisierten Schaltgetriebe erreicht dieses Modell eine
Höchstgeschwindigkeit von bis zu 25km/h (bereifungsabhängig).
Die Bedienung erfolgt über ein Gaspedal im rechten Fußraum,
einen Gruppen- und Gangschalthebel am linken
Kotflügel und einem mechanischen Wendeschalthebel links am
Lenkstock.
Hydraulik:
Der ISEKI TM 3217 AHL Bügelmaschine ist serienmäßig mit
einem doppeltwirkenden Hydrauliksteuerventil mit
Schwimmstellung ausgestattet. Diese werden über einen, im
rechten Kotflügel angebrachte, Einzelhebel gesteuert.
Die Kabinenmodelle haben keine serienmäßige Zusatzhydraulik.
Des weiteren ist die Maschine mit einem hydraulischen
Heckkraftheber ausgestattet, welcher ebenfalls über einen Hebel
am rechten Kotflügel angesteuert wird.
Zapfwelle:
Diese Maschine bietet eine Drehzahl 540U/min an der
Heckzapfwelle. Die Zapfwelle wird mechanisch vorgewählt
und mechanisch über die Fahrkupplung zugeschaltet, somit wird
der Zapfwellenbetrieb beim Kuppeln unterbrochen.
Ausstattung:
Die Maschine ist serienmäßig für den Betrieb im Bereich der
StVZO ausgerüstet. Eine höhenverstellbare
Maulkupplung und eine 7-polige Anhängersteckdose sind Teil
des serienmäßigen Lieferumfangs.
Zusatzausrüstung:
- AS- Räder, vorn 23 x 10.50 - 12
- AS- Räder, hinten 280 / 70 R18
Außenbreite: 1.244mm
Bügelhöhe (3217 / 3267): 2.365mm / 2.384mm
Kabinenhöhe (3217 / 3267): 2.025mm / 2.019mm
- Mechanisches Hydraulikventil mit 3 Steuerfunktionen
Der Steuerblock ist auf dem rechten Kotflügel montiert und seine
Abdeckung dient als Armlehne.
Die Steuerung erfolgt über einen Kreuzsteuerhebel und einen Einzelhebel.
Folgende Steuerfunktionen sind gegeben:
DS (doppelwirkend mit Schwimmstellung)
D (doppelwirkend)
ES (einfachwirkend mit Schwimmstellung)
- Hydraulikkupplung hinten
für externe Verbraucher mit Schnellkuppelsteckdose ARGUS NW
8 (Satz = 1 Stück)
- Anbaukonsolen Frontlader
Die verschiedenen Hydraulikfunktionen werden durch
Absperrhähne bzw. Ausstecken der Hydraulikkupplungen voneinander getrennt.
Maximale Aushubhöhe: 2.000mm
Durchgehende Hubkraft: 363kg
Maximale Hubkraft: 438kg
- Frontladerschwinge
bestehend aus 2 doppelwirkenden Hubzylindern und hydr. Gerätebetätigung
- Leichtgutschaufel 1.20m
Arbeitsbreite: 1.200mm
Show original
The used small tractor/ special tractor Iseki TM 3217AL mit Frontlader (new if there is the mark “N” or “New machine”) is for sale at Landwirt.com!
This small tractor/ special tractor has the power of 20 hp (15 kW) HP (Horse Power).
It has the construction year of 2022.
The used small tractor/ special tractor Iseki TM 3217AL mit Frontlader has been in work 3 working hours.
The used small tractor/ special tractor Iseki TM 3217AL mit Frontlader is for sale at the price of 19.900 EUR incl. VAT 20% (if abroad: plus transport, forwarding and customs fees).
Used machine
Type:
TM 3217AL mit Frontlader
hp:
20 hp / 15 kW
Working hours:
3 h
Year of construction:
2022
PDF specifications
Add to favourits
Christoph Hirsch
Show telephone number
Show telephone number
Address verified
Phone verified
Phone verified
MEMBER SINCE 2003
Lagerhaus Thermenland
Grosswilfersdorf 240
8263 - Grosswilfersdorf
8263 - Grosswilfersdorf
More offers from this dealer
All ads of this dealer
