Uniforest 85GH-Stop Seilwinde mit Hilfswinde & Funk

Immediately available!
Uniforest 85GH-Stop cable winch with auxiliary winch & radio.

Equipment & details:
- Drive: worm gear
- Tensile force upper rope layer (kN): 56 (with 12mm/90m rope)
- Tensile force lower rope layer (kN): 85
- Braking force (kN): 106
- Average rope speed (m/s): 0.5 at 540 rpm
- Average rope speed. (m/s): 0.9 at 1000 rpm
- Rope design (m/mm): 120/12
- Recommended tractor power (KW/HP): at least 74/100
- Blade width (m): 2.10
- Total height (m): 2.30
- Total width (m): 0.93
- 3-stage piston pump
- Limit switch
- Hydraulically adjustable blade
- Weight excl. Wire rope (kg): 720
- Revolutions (rpm): 540/1000
- Clutch plates (pcs.): 6
- Rope end piece straight swivel strap with 2 pcs. sliders
- Chainsaw holder
- Sappel holder
- Towing device
- Adjustable rope output
- Electric operation
- PTO shaft
- 2 chains, 2.5m / 8mm, blue
- Speed regulation. Rope output using a flow divider and return

Incl. Uniforest auxiliary winch 6HW Pro (installed)
- incl. 350m/4.1mm plastic rope
- pulley
- belt
- carabiner

Equipment & details for the radio:

Terra radio without tilt sensor
- Range (m): 500
- Functions (pcs.): 8
- 12V operating voltage
- Transmitter dimensions (mm): 155-110-60
- Frequency (Mhz): 433.875-434.650
- Weight (g): 600
- Protection class Ip65
- Impulsive or continuous tension and brake relief
- Throttle regulation
- Battery capacity (mA): 600
(Surcharge for tilt sensor 200,- incl. VAT)

Can be ordered with on request Gas regulation & or starting & stopping the engine (note: significantly more expensive!)

Available immediately if you are interested.
Delivery possible throughout Austria.