Fliegl PFW 15.500 Poly Line + Skate 150
-
-
-
-
-
-
-
-
-
Questions to this offer?
EUR
133.875
incl. VAT 19%
(112.500 excl. VAT 19%)
Test our demonstration machine!
Pump barrel wagon Fliegl PFW 15500 Poly Line
Demonstration machine, used
Year of manufacture 2022
approx. 450 loads in total
- in series
- tandem chassis
- permissible total weight 24,000 kg (corresponds to 20,000 kg axle load plus 4,000 kg support load) up to 40 km/h, axle distance over 1,800 mm, only possible in conjunction with steering axle, not possible with Titan and Gigant units, ball head required
- adjustable drawbar, bottom hitch
- K80 ball head (80 mm diameter)
- hydraulic drawbar suspension including drop support foot (1 double-acting control unit required)
- 2-circuit compressed air with ALB
- hydraulic axle shift (1 double-acting control unit required, not possible with hydraulic and air suspension)
- pendulum unit Boogie SB (low center of gravity)
- 2 Brake axles, front rigid, rear steered, hydraulically lockable, up to 60 km/h (1 single-acting control unit required)
- Axle version 410 x 180 brake drum BPW
- 40 km/h version with EC type approval and COC papers (incl. fender, underrun protection and side marker lights)
- Tires 750/60 R30.5 spring center 900 mm, load capacity per wheel 6,740 kg at 40 km/h
- Container made of GRP
- Hydraulic sliding cover at the front, incl. position indicator (1 double-acting control unit required)
- Wangen eccentric screw pump 6,000 L with stone trap
- 6" Perrot suction slide with quick coupler on the left
- Level indicator
- Porthole
- LED lighting 12 V with 7-pin plug
- Conical rotary slide, hydraulic (1 double-acting control unit required)
- Hose storage (not required when installing a drag shoe/drag hose distributor)
- Continuously strong hollow beam frame
- 2 baffles
- Universal joint shaft on one side, wide angle with overload protection, heavy-duty design
- Mounting brackets for drag shoe/four-point hydraulics
- Hydraulic shredding cutter for suction, screw pump and pump box and 1 control unit required. In combination with hydraulic pump shutdown, a 6-way control block is required
- Suction nozzle 8" with docking station, direction of travel to the right, including pump box (3 double-acting control units required; in conjunction with pneumatic pump switching, only 1 double-acting control unit required)
- automatic hydraulic pump switching (when the maximum fill level is reached, the slides are switched to pumping mode), additional display on the control panel when the barrel is empty by means of optical (lamp) and acoustic signaling, hydraulic plate slide as suction slide, switch on the barrel for switching the slides, if the three-way slide is closed, this is displayed on the control panel. Control block and 2 control block sections required!
- Digital flow meter ISOBUS: shows m³/ha and m³/min., driving suggestion to reach the set m³/ha (tractor with ISOBUS and TECU according to AEF required)
- 2 LED work lights
- 5-way control block with control panel: 5x13 l DW Load-Sensing
+
Fliegl trailing shoe distributor Skate 150
- in series
- Working width 15 m, hydraulically foldable
- Slurry distribution augers lower pan and auger winding made of stainless steel with external oil motor
- Outlet opening (bore) of the auger pan 21 mm (mainly for pig slurry)
- Hose spacing 250 mm
- Collision protection left and right at the boom ends
- Leaf springs (exact outlet guide)
- Screwed trailing shoe nozzle TWIN, division of the slurry jet at the outlet, doubling of the delivery belts, suitable for grassland and arable land (narrow slurry strip ensures less feed contamination), in conjunction with additional folding, two fewer TWIN nozzles are installed on the outer swivel joints, these are replaced by simple trailing shoe nozzles
- ISOBUS comfort control including control panel (control panel not required, in combination with Fliegl Slurry Tanker), load sensing, with sequential switching and change of direction of rotation of the augers
- Transport lock
- Storage box can be opened hydraulically, including 1-way control block
- Attachments for mounting on Fliegl poly-barrel, including console for connection to H-frame, bracket for transport lock and support on top of container, top link (required for poly-barrel)
- Assembly costs (when completed with barrel)
- Slider side shut-off hydraulic left, including control block
- Slider side shut-off hydraulic right, including control block
- Feeler wheels
Pump barrel wagon Fliegl PFW 15500 Poly Line
Demonstration machine, used
Year of manufacture 2022
approx. 450 loads in total
- in series
- tandem chassis
- permissible total weight 24,000 kg (corresponds to 20,000 kg axle load plus 4,000 kg support load) up to 40 km/h, axle distance over 1,800 mm, only possible in conjunction with steering axle, not possible with Titan and Gigant units, ball head required
- adjustable drawbar, bottom hitch
- K80 ball head (80 mm diameter)
- hydraulic drawbar suspension including drop support foot (1 double-acting control unit required)
- 2-circuit compressed air with ALB
- hydraulic axle shift (1 double-acting control unit required, not possible with hydraulic and air suspension)
- pendulum unit Boogie SB (low center of gravity)
- 2 Brake axles, front rigid, rear steered, hydraulically lockable, up to 60 km/h (1 single-acting control unit required)
- Axle version 410 x 180 brake drum BPW
- 40 km/h version with EC type approval and COC papers (incl. fender, underrun protection and side marker lights)
- Tires 750/60 R30.5 spring center 900 mm, load capacity per wheel 6,740 kg at 40 km/h
- Container made of GRP
- Hydraulic sliding cover at the front, incl. position indicator (1 double-acting control unit required)
- Wangen eccentric screw pump 6,000 L with stone trap
- 6" Perrot suction slide with quick coupler on the left
- Level indicator
- Porthole
- LED lighting 12 V with 7-pin plug
- Conical rotary slide, hydraulic (1 double-acting control unit required)
- Hose storage (not required when installing a drag shoe/drag hose distributor)
- Continuously strong hollow beam frame
- 2 baffles
- Universal joint shaft on one side, wide angle with overload protection, heavy-duty design
- Mounting brackets for drag shoe/four-point hydraulics
- Hydraulic shredding cutter for suction, screw pump and pump box and 1 control unit required. In combination with hydraulic pump shutdown, a 6-way control block is required
- Suction nozzle 8" with docking station, direction of travel to the right, including pump box (3 double-acting control units required; in conjunction with pneumatic pump switching, only 1 double-acting control unit required)
- automatic hydraulic pump switching (when the maximum fill level is reached, the slides are switched to pumping mode), additional display on the control panel when the barrel is empty by means of optical (lamp) and acoustic signaling, hydraulic plate slide as suction slide, switch on the barrel for switching the slides, if the three-way slide is closed, this is displayed on the control panel. Control block and 2 control block sections required!
- Digital flow meter ISOBUS: shows m³/ha and m³/min., driving suggestion to reach the set m³/ha (tractor with ISOBUS and TECU according to AEF required)
- 2 LED work lights
- 5-way control block with control panel: 5x13 l DW Load-Sensing
+
Fliegl trailing shoe distributor Skate 150
- in series
- Working width 15 m, hydraulically foldable
- Slurry distribution augers lower pan and auger winding made of stainless steel with external oil motor
- Outlet opening (bore) of the auger pan 21 mm (mainly for pig slurry)
- Hose spacing 250 mm
- Collision protection left and right at the boom ends
- Leaf springs (exact outlet guide)
- Screwed trailing shoe nozzle TWIN, division of the slurry jet at the outlet, doubling of the delivery belts, suitable for grassland and arable land (narrow slurry strip ensures less feed contamination), in conjunction with additional folding, two fewer TWIN nozzles are installed on the outer swivel joints, these are replaced by simple trailing shoe nozzles
- ISOBUS comfort control including control panel (control panel not required, in combination with Fliegl Slurry Tanker), load sensing, with sequential switching and change of direction of rotation of the augers
- Transport lock
- Storage box can be opened hydraulically, including 1-way control block
- Attachments for mounting on Fliegl poly-barrel, including console for connection to H-frame, bracket for transport lock and support on top of container, top link (required for poly-barrel)
- Assembly costs (when completed with barrel)
- Slider side shut-off hydraulic left, including control block
- Slider side shut-off hydraulic right, including control block
- Feeler wheels
Testen Sie unsere Vorführmaschine!
Pumpfasswagen Fliegl PFW 15500 Poly Line
Vorführmaschine, eingesetzt
Baujahr 2022
ca. 450 Fuhren gesamt
- in Serie
- Tandem-Fahrgestell
- zul. Gesamtgewicht 24.000 kg (entspricht 20.000 kg Achslast zzgl. 4.000 kg Stützlast) bis 40 km/h, Achsabstand über 1.800 mm, nur in Verbindung mit Lenkachse möglich, nicht mit Titan- und Gigant-Aggregat möglich, Kugelkopf erforderlich
- verstellbare Zugdeichsel, Untenanhängung
- K80 Kugelkopf (80 mm Durchmesser)
- hydraulische Deichselfederung incl. Fallstützfuß (1 Steuergerät doppeltwirkend erforderlich)
- 2-Kreis-Druckluft mit ALB
- hydraulische Achsverschiebung (1 Steuergerät doppelwirkend erforderlich, nicht bei hydraulischer und Luftfederung möglich)
- Pendelaggregat Boogie SB (niedriger Schwerpunkt)
- 2 Bremsachsen, vordere starr, hintere gelenkt, hydraulisch sperrbar, bis 60 km/h (1 Steuergerät einfachwirkend erforderlich)
- Achsausführung 410 x 180 Bremstrommel BPW
- 40 km/h Ausführung mit EG Typengenehmigung und COC Papieren (incl. Kotflügel, Unterfahrschutz und Seitenmarkierungsleuchten)
- Bereifung 750/60 R30,5 Federmitte 900 mm, Traglast pro Rad 6.740 kg bei 40km/h
- Behälter aus GFK
- Schubdeckel hydraulisch vorne, incl. Positionsanzeige (1 Steuergerät doppelwirkend erforderlich)
- Wangen Exzenterschneckenpumpe 6.000 L mit Steinfangmulde
- 6" Ansaugschieber Perrot mit Schnellkuppler links
- Füllstandsanzeiger
- Bullauge
- LED Beleuchtung 12 V mit 7-poligem Stecker
- konischer Drehschieber hydraulisch (1 Steuergerät doppelwirkend erforderlich)
- Schlauchablage (entfällt bei Montage Schleppschuh/ Schleppschlauchverteiler)
- durchgehend starker Hohlträgerrahmen
- 2 Schwallwände
- Gelenkwelle einseitig Weitwinkel mit Überlastsicherung, schwere Ausführung
- Anbaukonsolen für Schleppschuh/Vierpunkthydraulik
- Zerkleinerungscutter hydraulisch bei der Ansaugung Schneckenpumpe und Pumpenkasten und 1 Steuergerät erforderlich. In Kombination mit hydraulischer Pumpenabschaltung, ist ein 6-fach Steuerblock erforderlich
- Saugrüssel 8" mit Andockstation Fahrtrichtung rechts incl. Pumpenkasten (3 Steuergeräte doppelwirkend erforderlich; in Verbindung mit pneumatischer Pumpenumschaltung nur 1 Steuergerät doppelwirkend erforderlich)
- automatische Pumpenumschaltung hydraulisch (beim Erreichen des maximalen Füllstandes, werden die Schieber auf den Umpumpmodus umgestellt), zusätzliche Anzeige am Bedienpult wenn das Fass leer ist durch optische (Lampe) und akustische Signalisierung, hydraulischer Plattenschieber als Ansaugschieber, Schalter am Fass zum Umschalten der Schieber, ist der Dreiwegeschieber geschlossen wird das am Bedienpult angezeigt. Steuerblock und 2 Steuerblocksektionen erforderlich!
- Digitaler-Durchflussmesser ISOBUS: zeigt m³/ha und m³/Min., Fahrvorschlag zum Erreichen der eingestellten m³/ha (Schlepper mit ISOBUS und TECU nach AEF erforderlich)
- 2 LED Arbeitsscheinwerfer
- 5-fach Steuerblock mit Bedienpult: 5x13 l DW Load-Sensing
+
Fliegl Schleppschuhverteiler Skate 150
- in Serie
- Arbeitsbreite 15 m, hydraulisch einklappbar
- Gülleverteilschnecken Unterwanne und Schneckenwindung aus Edelstahl mit außenliegendem Ölmotor
- Auslauföffnung (Bohrung) der Schneckenwanne 21 mm (überwiegend für Schweinegülle)
- Schlauchabstand 250 mm
- Anfahrschutz links und rechts an den Auslegerenden
- Blattfedern (exakte Auslaufführung)
- geschraubte Schleppschuhdüse TWIN, Teilung des Güllestrahls am Auslass, Verdoppelung der Ablagebänder, geeignet für Grün- und Ackerland (schmaler Güllestreifen sorgt für weniger Futterverschmutzung), in Verbindung mit zusätzlicher Einklappung werden an den äußeren Drehgelenken zwei TWIN-Düsen weniger verbaut, diese werden durch einfache Schleppschuhdüsen ersetzt
- Komfortsteuerung ISOBUS inklusive Bedienpult (Bedienpult entfällt, in Kombination mit Fliegl Slurry Tanker), Load Sensing, mit Folgeschaltung und Drehrichtungsänderung der Schnecken
- Transportsicherung
- Staukasten hydraulisch zu öffnen, inklusive 1-fach Steuerblock
- Anbauteile für Montage an Fliegl Poly-Fass, incl. Konsole für Verbindung zu H-Rahmen, Halterung für Transportsicherung und Abstützung auf Behälter oben, Oberlenker (erforderlich für Poly-Fass)
- Montagekosten (bei Komplettierung mit Fass)
- Schieber-Seitenabschaltung hydraulisch links, inkl. Steuerblock
- Schieber-Seitenabschaltung hydraulisch rechts, inkl. Steuerblock
- Tasträder
Show original
Used machine
Type:
PFW 15.500 Poly Line + Skate 150
Capacity (l):
15500 l
Working hours:
450 h
Year of construction:
2022
PDF specifications
Add to favourits
Jürgen Seiler
Show telephone number
Show telephone number
Seiler GmbH & Co. KG Landtechnik
An der Eich 8
91522 - Ansbach
91522 - Ansbach
More offers from this category
